Xantrex Freedom HF 1000 Inverter/Charger

Freedom HF 1000 Inverter/Chargers are designed to run entertainment systems and small appliances in smaller boats, RV's and trucks. The Freedom HF Inverter/Chargers are the smallest, lightest and least expensive models in the Xantrex lineup.

The Freedom HF is available in two sizes: 1000 watts with a 20 amp charger and 1800 watts with a 40 amp charger. Both Freedom HF models are designed for demanding marine and RV conditions. Temperature controlled multistage charging ensures that your batteries are recharged safely and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information and can be mounted wherever you require the information.

Product Features:

Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment.
Removable digital display to provide system status
Automatic three-stage battery charger
Designed to be hardwired using a terminal strip, or by connecting AC through GFCI receptacles (included)
Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power

Xantrex HF

Electrical Specifications - Inverter
Model	HF 1000
Output power (continuous)	1000 W
Surge power	2000 W
Output frequency regulation	60 Hz
Inverter voltage regulation	115 +/-10 Vrms
Output wave form	Modified sine wave
Efficiency (full load)	> 82%
Peak efficiency	> 87%
No-load current draw (idle mode)	< 1 Adc
Off mode current draw (display off)	< 5 mA

Electrical Specifications - Charger
Charge rate	20 A
AC input voltage range	95 – 130 Vac
AC transfer relay	30 A
Battery voltage (nominal)	12 Vdc
Battery voltage range	10.5 – 15.5 Vdc
Low battery cut-out	10.5 Vdc
AC input (max. charge)	5 Aac
Default bulk charge voltage setting	14.2 Vdc
Default float charge voltage setting	13.5 Vdc
Equalize charge voltage (wet cell only)	N/A
Battery charge outputs	One
Charge control	Three-stage
Battery type settings - Flooded / Gel / AGM / Fixed 13.5 Vdc
Equalization	No
Internal temperature-sensitive charging	Yes

General Specifications
Optimal operating temperature range	0°C to 40°C
Optional remotes	Detachable display
Unit weight	10 lb (4.5 kg)
Unit dimensions (H x W x L)	4.2 x 9.5 x 15.5“
Warranty	One year
Part number	806-1020
Regulatory & Environmental Compliance
Certified to CSA Standard C22.2 No. 107.1 and UL458

Download specification sheet from Xantrex Technology Website here (pdf)

Popular Products